Announcements Loops / Script Control in MediaShout 7

Here is a step-by-step guide to building and setting up an Announcement Loop in MediaShout 7 using the Script Control Plug-in.

First, if you just have 1 cue (as shown in the picture below) that needs to be looped over and over again, you would select that cue on the left side of MediaShout 7. You will then see a small "Clock Object" appear on the cue itself. This is where you will set your "Advance Time" for the cue and the pages within that cue.

Then, on the right side of the program, click the Script Control Plug-In to open that window.

 

 

Next, click the top checkbox for "After the current cue play ___ cue" and choose the Announcements Cue (or whatever your cue is named on the left side of MediaShout).

If you have multiple cues on the left side of MediaShout that need to be looped, you would follow these steps:

First, select the first Announcement cue on the left side of MediaShout. set your "Advance Time", then, click the Script Control Plug-in on the right side of MediaShout 7.

 

Next, you will select the Announcement 2 cue listed on the left side of MediaShout. And set your "Advance Time" for that as well.

 

 

Next, click the top checkbox for "After the current cue play ___ cue" and choose the Announcements Cue  (or whatever your cue is named on the left side of MediaShout).

 

If you have any trouble with this, please email Support@MediaShout.com for further assistance.